The two-dimensional functionally graded materials, (2D-FGMs) have been recently introduced in order to
significantly reduce the thermal stresses in machine elements that subjected to sever thermal loading. To
the author’s knowledge no work was found that investigates the elastic–plastic stress analysis for 2DFGMs.
In the current work, a 3D finite element model of 2D-FGM plates made of ZrO2, 6061-T6 and Ti-
6Al-4V with temperature dependent material properties has been proposed to perform such analysis.
An elastic plastic stress–strain relation based on the rule of mixture of the 2D-FGM has been introduced
in the model. Also, a 3D finite element model of conventional FGM plates, of ZrO2/Ti-6Al-4V and ZrO2/
6061-T6, with temperature dependent material properties has been proposed for the investigation of
these plates too. Then, elastic–plastic stress analysis of the considered four plates (two conventional
FGMs and two 2D-FGMs) under the same transient cyclic heating and cooling was carried out. It was
found that heat conductivity of the metallic constituents of FGM has great effect on the temperature distributions
that resulting from the thermal loads. Minimum temperatures variation and minimum stresses
can be obtained using ZrO2/6061-T6/Ti-6Al-4V 2D-FGM. Also, the results indicate that only ZrO2/6061-
T6/Ti-6Al-4V 2D-FGM can stand with the adopted sever thermal loading without fracture or plastic
deformations.