Skip to main content

Prediction of axial compressive strength
of reinforced concrete circular short
columns confined with carbon fiber
reinforced polymer wrapping sheets

مؤلف البحث
Omar Ahmed Farghal and Hesham Mohamed Ahmed Diab
المشارك في البحث
سنة البحث
2013
مجلة البحث
Journal of Reinforced Plastics
and Composites
عدد البحث
Vol.32,No.19
تصنيف البحث
1
صفحات البحث
PP.1406–1418
ملخص البحث

External confinement of concrete columns by means of carbon fiber reinforced polymer (CFRP) sheets can be considered
as an efficient technique for their structural strengthening. An experimental research program including 18 circular short
column specimens were tested under axial compression load, to investigate the gain strength of reinforced concrete (RC)
columns confined with CFRP sheets. The parameters studied were both the volume and configurations of CFRP sheets,
the size of cross-section, the percentage of main reinforcement, and the volume of internal stirrups. On the basis of the
obtained results, mathematical models (Egyptian code and American Concrete Institute code) proposed to predict the
axial compressive strength of non-slender RC column strengthened by means of CFRP sheets are evaluated. These codes
showed an underestimation in predicting the axial compressive strength of RC strengthened columns. This, from the
authors’ point of view, is attributed mainly to the fact that the proposed models overlooked the amount of internal
stirrups when calculating the strength of strengthened columns. Therefore, modifications in the studied models were
considered. The modifications take the effective lateral confining pressure due to presence of internal steel stirrups into
account. The modified codes showed an acceptable approach to the experimental results.