In the present study, the heat transfer, entropy, friction factor, exergy efficiency, pumping power, and performance
index ratio of nickel/water nanofluids flow in a corrugated plate heat exchanger are investigated
experimentally. The nickel nanoparticles were synthesized using the chemical precipitation method and characterized
by various techniques. The stable water based nickel nanofluids were prepared with particle volume
concentrations of 0.1%, 0.3%, and 0.6%. The experiments were conducted at nanofluids Reynolds numbers
ranged from 300 to 1000. The properties of nickel nanofluid are evaluated experimentally as well. The thermal
conductivity and viscosity enhancements are 33.92%, and 67.45% at a temperature of 60 ◦C compared to the
base fluid data. The increase of nanoparticle loadings and Reynolds number leads to an augmentation of the
overall heat transfer coefficient, heat transfer coefficient, and Nusselt number. The overall heat transfer coefficient,
convective heat transfer, and Nusselt number enhanced by 38.60%, 57.35%, and 42.68% at 0.6 vol % of
nanofluid and a Reynolds number of 707, respectively compared to water data. The thermal entropy generation
is decreased by 15.70%, while frictional entropy generation and pumping power are increased by 68.29% and
61.77%, respectively at 0.6 vol % of nanofluid and a Reynolds number of 707 against water data. The exergy
efficiency was enhanced by 42.27% at 0.6 vol % of nanofluid and a Reynolds number of 303 compared to water
data. The performance index ratio is decreased with the use of nanofluids due to the increase of viscosity, friction
factor, pressure drop, and pumping power.