Mahmoud Amin Ahmed Abdullah

Faculty of Engineering

Assiut University

Department
Fax No
N/A
Email:
aminism@aun.edu.eg
MIS Email
mahmoud.abdallah1@eng.au.edu.eg
Mobile
01008370279
Office
0882411237 - 031227
Google Scholar
google_scholar
Ph. D. In Mechanical Engineering (N/A) , Faculty of Engineering Mississippi State University (USA) , 1994
M. Sc. In Mechanical Engineering (N/A) , Faculty of Engineering Assiut University , 1987
B. Sc. In Mechanical Engineering (N/A) , Faculty of Engineering Assiut University , 1983

Professor Faculty of Engineering, Assiut University , 2008

Associate Professor Faculty of Engineering, Assiut University , 2003

Lecturer Faculty of Engineering, Assiut University , 1995

Assistant Lecturer Faculty of Engineering, Assiut University , 1987

Demonstrator Faculty of Engineering, Assiut University , 1983

Vice Dean for Graduate Studies and Research Faculty of Engineering, Assiut University ,since 2012-08-01 To 2013-10-01
# Title Research Year
1 Experimental investigation of humidification-dehumidification
desalination system with corrugated packing in the humidifier 		2017
2 Simulation of transport phenomena in a photo-electrochemical reactor for solar hydrogen production 2016
3 Simulation of transport phenomena in a photoelectrochemical reactor for solar hydrogen production 2016
4 Numerical Study of Solid Oxide Fuel Cell Performance with Helical and Serpentine Flow Field Designs 2015
5 TRANSPORT PHENOMENA MODELING OF A PHOTO-ELECTROCHEMICAL REACTOR FOR HYDROGEN PRODUCTION 2015
6 Effect of thermophoresis on natural convection in a Rayleigh–Benard cell filled with a nanofluid 2015
7 Laminar Forced Convection of a Nanofluid in a Microchannel: Effect of Flow Inertia and External Forces on Heat Transfer and Fluid Flow Characteristics 2015
8 EFFECT OF A NEW VORTEX GENERATOR ON THE PERFORMANCE OF AN AXIAL COMPRESSOR CASCADE AT DESIGN AND OFF-DESIGN CONDITIONS 2015
9 Numerical Simulation of Natural Convection of a Nanofluid in an Inclined Heated Enclosure Using Two-Phase Lattice Boltzmann Method: Accurate Effects of Thermophoresis and Brownian Forces 2015
10 BOUNDARY LAYER CONTROL OF AN AXIAL COMPRESSOR CASCADE USING NONCONVENTIONAL VORTEX GENERATORS
 		2015
11 Influence of spinning cup and disk atomizer configurations on droplet size and velocity characteristics 2014
12 The onset of liquid entrainment from a stratified two-phase region through small branches 2014
13 Natural convection in a differentially-heated square enclosure filled with a nanofluid: Significance of the thermophoresis force and slip/drift velocity 2014
14 A ripple current minimisation based single phase PWM inverter
 		2014
15 Secondary Flow Control on Axial Flow Compressor Cascade Using Vortex Generators
 		2014
16 Two-dimensional modeling of viscous liquid jet breakup 2013
17 Investigation of heat transfer and fluid flow in transitional regime inside a channel with staggered plates heated by radiation for PV/T System 2013
18 Influence of Parallel Flow Field Design on the Performance of PEM Fuel Cells 2013
19 Numerical Investigation of Evaporating Bi-component Droplets in a Turbulent Environment HEFAT

 		2012
20 Characteristics of Mean Droplet Size Produced by Spinning Disk Sprayers 2012
21 A New High Voltage Gain Dual Boost DC-DC Converter for Potovoltac Power Systems 2012
22 Rapid thermodynamic simulation model for optimum performance of a four-stroke, direct- injection, and variable-compression-ratio 5 diesel engine 2012
23 Virtual Height Aided Solar Chimney: A New Design 2011
24 Optimum Compression Ratio Variation of a 4-Stroke, Direct Injection, Diesel Engine for Optimum Performance 2011
25 Powder Production by Emulsion Combustion Method 2011
26 "Methanol Crossover in Direct Methanol Fuel Cells for Portable Applications: Achievements and Challenges" 2011
27 A One Dimensional Model of Viscous Liquid Jets Breakup 2011
28 A Theoretical Model for the Formation of Functional Micro-and Nano- Particles from Emulsion Droplet Combustion 2011
29 Electro-Thermal Modeling of Solar Photovoltaic Arrays 2011
30 Numerical Simulation of Thin-Film Photovoltaic Solar Cells 2011
31 Modeling of laminar viscous flow in a semi-porous channel under uniform magnetic field 2011
32 Performance Analysis of a vacuum desalination system 2011
33 Methanol Crossover in Direct Methanol Fuel Cells for Portable Applications: Achievements and Challenges 2010
34 Study of Heat Transfer and Fluid Flow in Transitional Regime inside a Channel with Offset Plates Heated By Radiation 2010
35 Modeling of Particle Formation via Emulsion Combustion Spray Method 2010
36 Characteristics of heat transfer and fluid flow in a channel with single-row plates array oblique to flow direction for photovoltaic/thermal system 2010
37 Experimental and theoretical studies Of a vacuum desalination system using engine waste heat 2010
38 Modeling and Simulation of Photovoltaic Arrays 2010
39 Breakup Length of Liquid Sheets Formed by Splash Plate Nozzles 2009
40 A New Criterion for the Onset of Liquid Entrainment from a Stratified Two-Phase Region 2009
41 Performance of an absorber with Hydrophobic membrane contactor at aqeous solution-water vapor interface 2009
42 Modeling of Particle Formation During Droplet-to- Particle Spray Methods 2009
43 Influence of Breakup Regime on the Droplet Sizes Produced By Splash-Plate Nozzles 2009
44 Influence of Wall Inclination Angle on the Onset of Gas Entrainment during Single and Dual Discharges from a Stratified Two-Phase Region 2008
45 Characterization of black Laquor Sprays From Splash Plate Nozzles 2008
46 Characteristics of Liquid Sheets Formed By Splash Plate Nozzle 2008
47 Characteristics of Liquid Sheets Formed By Splash Plate Nozzle 2007
48 A Fundamental Study of Black Liquor Sprays Formed by Splash Plate Nozzles 2007
49 Effect of Viscosity on the Breakup Length of Liquid Sheets Formed by Splash Plate Nozzles
 		2006
50 Theoretical Analysis of the Onset of Gas Entrainment from a Stratified Two-Phase Region Through Two-Side Oriented Branches Mounted on a Vertical Wall 2006
51 Modeling Nano-Particle Formation during Spray Pyrolysis 2006
52 Controlling of Droplet Size Produced by Splash Plate Nozzles 2006
53 Characteristics of Liquid Sheet sprays Formed by Splash Plate Nozzles 2006
54 Atomization of Corn Syrup Using Splash Plate Nozzles 2006
55 Scaling Parameters for the Break-up Length of Liquid Sheets Formed by Splash Plate Nozzles 2005
56 Modeling Nano-Particle Formation in Spray Pyrolysis 2005
57 Theoretical Analysis of the Onset of Gas Entrainment from a Stratified Region through a Single Side-Branch at Moderate Frude Numbers 2004
58 The Onset of Gas Pull- Through During Dual Discharge From a Stratified Two-Phase Region-Theoretical Analysis 2004
59 Simulation of deep fixed aluminaz bed for desiccant air conditioning system 2004
60 Modeling of the onset of Gas Entrainment from a Stratified Two-Phase Region through Two Side Branches 2003
61 Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch 2003
62 Effects of Rim Angle and Serration of Rotary Disk Atomizers on Spray Characteristics 2003
63 Modeling of the Onset of Gas Entrainment from a Stratified Two-Phase region Through a Single Branch on an Inclined Wall 2002
64 Modeling of the Onset of Gas Entrainment Through a Finite-Side Branch 2002
65 The Onset of Gas Entrainment from a Stratified Two-Phase Region Through a Single Side Branch 2002
66 Performance Testing of Rotating Cup and Cylindrical Atomizers 2002
67 Effect of Injection Pressure on the Performance of a Swirl Atomizer 2002
68 Effect of Geometry of Rotating Disks and Cups on Spray Characteristics 2001
69 An Experimental Investigation of Spray Characteristics of a high speed Rotating Disk Atomizer Using PDPA 2001
70 Effect of Geometry of Rotating Disks and Cups on Spray Characteristics 2001
71 Two Dimensional Modeling of the Atomization of a Viscous Liquid Jet 2001
72 Spray Characteristics of a Rotating Disk Atomizer 2001
73 A One-Dimensional Computational Model of Viscous Liquid Jet Break-Up 1999
74 A two dimensional computational model of viscous liquid jet break-up, Part I : Laminar flow 1999
75 Computational Study of the Break-Up Process of Liquid Jets 1998
76 A New K-t Model for Near-Wall Turbulent Flows 1998
77 Prediction of Hydraulic nozzle Deposit Patterns 1994
78 Prediction of Liquid Atomizer Performance in Boom-wise Direction

 		1988
79 Experimental investigation of rotary atomizers spray patterns: effect of operating conditions and atomizer shapes 1988
80 Experimental Investigation of Rotary Atomizers Spray Patterns : Effect of Operating Conditions and Atomizer Shape 1988
81 Prediction of atomizer performance in boom-wise direction 1988
82 Overlapping of rotary atomizers spray patterns 1988
83 Overlapping of Rotary Atomizers Spray Patterns


 		1988

الجمعيات العلمية و النقابات :

Research Projects