Mohamed Omar Ahmed Abdelgawad

Faculty of Engineering

Assiut University

Department
Power Mechanical Engineering Department
MIS Email
m.abdelgawad@aun.edu.eg
Mobile
20-88-241-1239
Office
N/A - 1239
Google Scholar
google_scholar

Ph. D. In Mechanical engineering () , University of Toronto, Canada , 2009
M. Sc. In Mechanical engineering () , Concordia University, Canada , 2003
B. Sc. In Mechanical Engineering () , Faculty of Engineering Assiut University , 1998


Associate Professor Faculty of Engineering, ِِAssiut University , 2016

Lecturer Faculty of Engineering, Assiut University , 2010

Assistant Lecturer Faculty of Engineering, Assiut University , 2004

Demonstrator Faculty of Engineering, Assiut University , 1998

# Title Research Year
1 Microchannel geometry vs flow parameters for controlling nanoprecipitation of polymeric nanoparticles 2021
2 Numerical simulation of photothermally induced Marangoni flow around a microbubble 2019
3 Optimization of Preparation of Polymeric Nanoparticles Using Microfluidics 2018
4 Effect of interfacial electrical shear stresses on hydrodynamic flows inside droplets actuated by electrowetting on dielectric 2016
5 Real-time open source machine vision software for closed loop control of flow in microfluidics devices 2016
6 Tissue dissociation miniaturized platform for uterine stem cell isolation and culture
 		2015
7 Repulsion-Based Model for Contact Angle Saturation in Electrowetting 2015
8 Development of Computer Assisted Sperm Analysis (CASA) Plugin for analyzing sperm motion in microfluidic environments using Image-J 2015
9 Numerical investigations of the effect of flow arrangement and number of layers on the performance of multi-layer microchannel heat sinks, 2015
10 Digital microfluidic processing of mammalian embryos for vitrification 2014
11 Characterization of Rheotaxis of Bull Sperm Using Microfluidics 2014
12 DEVELOPMENT OF A SIMPLE, ROBUST AND REAL-TIME IMAGE PROCESSING ALGORITHM FOR TRACKING AND ANALYZING CELLS AND DROPLETS INSIDE MICROCHANNELS 2014
13 Partially filled electrodes for digital microfluidic devices 2013
14 A review of nanotechnology development in the Arab World 2013
15 Electrodeformation for single cell mechanical characterization 2011
16 A fast and simple method to fabricate circular microchannels in polydimethylsiloxane 2010
17 Electrical power free, low dead volume, pressure-driven pumping for microfluidic applications 2010
18 Optimization of Device Geometry in Single-Plate Digital Microfluidics, 2009
19 Hybrid Microfluidics: A Digital-to-Channel Interface for In-Line Sample Processing and Chemical Separations 2009
20 A World-to-Chip Interface for Digital Microfluidics, 2009
21 The Digital Revolution: The New Paradigm of Microfluidics, 2009
22 Droplet-Scale Estrogen Assays in Breast Tissue, Blood, and Serum 2009
23 Low-Cost, Rapid-Prototyping of Digital Microfluidics Devices 2008
24 Soft-lithography: Masters on Demand, 2008
25 All-Terrain Droplet Actuation 2008
26 Rapid Prototyping in Copper Substrates for Digital Microfluidics 2007
27 Micro-Contact Printing-Based Fabrication of Digital Microfluidic Devices, 2006
28 Numerical Investigation of Multistage Viscous Micropump Configurations 2005
29 Microchannel Heat Sinks: An Overview of The State-of-The-Art 2004
30 Transient Behavior of the Viscous Micropump 2004

1- Waleed Mohamed Sayed Salman , Effect of Droplet Electrical Properties and Frequency of Applied Voltage on electrical Forces in Digital Microfluidic Devices ,2016-03-10
supervisor: Prof. Mazen S. Abdelsalam Dr. Mohamed F.F. Eldosoky Dr. Mohamed Omar Abdelgawad

2- Derek Pyne , Automated Vitrification of Mammalian Embryos on a Digital Microfluidic Platform ,2014-01-14
supervisor: Prof. Yu Sun Dr. Mohamed Omar Ahmad Abdelgawad

3- Hassan Abdelmoumen Abdellah Ali , Modeling of Contact Angle Saturation Phenomenon in Electrowetting on Dielectric Systems ,2014-11-30
supervisor: Prof. Youssef Mohamed Abdelreheem Prof. Hany Ahmad Mohamed Dr. Mohamed Omar Ahmad Abdelgawad
 

الجمعيات العلمية و النقابات :

Research Projects