Skip to main content

Multi-objective multi-verse optimization of renewable energy sources-based micro-grid system: Real case

Research Authors
Ashraf Mohamed Hemeida a,⇑, Ahmed Shaban Omer a, Ayman M. Bahaa-Eldin b, Salem Alkhalaf c, Mahrous Ahmed d, Tomnobu Senjyu e, Gaber El-Saady f
Research Member
Research Department
Research Date
Research Year
2021
Research Journal
Ain Shams Engineering Journal
Research Publisher
Elsevier BV on behalf of Faculty of Engineering, Ain Shams University.
Research Website
www.sciencedirect.com
Research Abstract

Hybrid micro-grid systems (HMGS) are small scale power system where the energy sources are installed to supply local customers. These systems may be considered as promising energy solution to meet the increased in energy demand and traditional sources depletion. Cost of electricity, system reliability, and environmental impacts of the system are three design criteria that must be considered in obtaining the accurate parameters of hybrid renewable energy system components. In this paper, hybrid micro-grid renewable energy system includes photovoltaic system, (PV) wind energy system, (WES) battery bank,(BB) and conventional diesel generator (DG) are proposed to meet the energy requirements in remote area, located in Red Sea called city of Bernice, Egypt, at 23 540 3100 N, 35 280 2100 E. Optimization of Cost of Electricity (COE), Renewable Factor (RF), and Loss of Power Supply Probability (LPSP) are main objective of the designing process of the hybrid system considered as the objective functions. Then, Multi-objective multi-verse optimization (MOMVO) algorithm is used with considering two scenarios, the first one is renewable sources and the second is renewable/diesel energy source. All the possible HMGS configurations namely: PV/battery, wind/battery, PV/wind/battery and PV/battery/diesel, wind/-battery/diesel, PV/wind/battery/diesel are studied and analyzed. Moreover, one year hourly meteorolog-ical weather data for case study are recorded. Reverse osmosis desalination (ROD) is considered in conjunction with the residential load. The proposed power management strategy is used to manage the system operation when supplying the load. A linear fuzzy membership function is used for purpose of decision making. The simulation results show that MOMVO produces appropriate components size and the PV/wind/battery/diesel is the optimum configuration with values of COE = 0.2720$/KWh, LPSP = 0.1397, and RF = 92.37% at w1 = 0.5, w2 = 0.3, and w3 = 0.2. Sensitivity analysis is performed to show the effect of changing system parameters on the objective functions. It is also shown that the techno-economic feasibility of using HMGS for rural electrification systems and enhance energy access. 2021 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Ain Shams Uni-versity. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).