Mohamed Mahmoud Abdelghany Mahmoud

Faculty of Engineering

Assiut University

Department
Power Mechanical Engineering Department
Fax No
N/A
Email:
mag@aun.edu.eg
MIS Email
mag@aun.edu.eg
Mobile
01006006438
Office
088 2411497
Google Scholar
google_scholar

Ph. D. In Mechanical Engineering (Fluid Mechanics) , Faculty of Engineering Kentucky State University - USA , 1982
M. Sc. In Mechanical Engineering (Fluid Mechanics) , Faculty of Engineering Assiut University , 1975
B. Sc. In Mechanical Engineering (Mechanical Power Engineering ) , Faculty of Engineering Assiut University , 1971


Emeritus Professor Faculty of Engineering, Assiut University , 2009

Professor Faculty of Engineering, Assiut University , 1998

Associate Professor Faculty of Engineering, Assiut University , 1989

Lecturer Faculty of Engineering, Assiut University , 1983

Assistant Lecturer Faculty of Engineering, Assiut University , 1975

Demonstrator Faculty of Engineering, Assiut University , 1971
# Title Research Year
1 Development and validation of an in-house CFD code for environmental flow simulation using measurements in atmospheric boundary layer wind tunnel 2016
2 Development, Verification and Validation of an In-House CFD Code for Weakly Compressible Flow 2014
3 Theoretical Study of the Performance of Underground and Overground Tanks in Seasonal Storage of Thermal Energy

 		2004
4 Comparative Study of the Performance of Under- and Over-ground Tanks in Seasonal Storage of Thermal Energy
 		2004
5 Numerical Study of Unsteady Flow in a Radial Vaned Compressor 2002
6 Enhancement of Centrifugal Compressor Diffuser Performance with Small Vanes Installation 2002
7 Numerical Study of the Flow in a Vanless and Vaned Diffusers of a Centrifugal Compressor
2001
8 Numerical Study of The Flow In Vaneless and Vaned Diffusers of a Centrifugal Compressor 2001
9 An Experimental Study of the Effect of Inducer Geometrical Parameters on the Performance of a Centrifugal Pump

 		2001
10 Analytical Investigation of Oscillations Associated with Cavitating Inducers 2001
11 An Experimental Study on the Improvement of the Suction Performance of a Centrifugal Pump Due to Inducer Installation

 		2001
12 Numerical Study of Unsteady Flow in a Radial Vaned Diffuser

 		2000
13 Performance Analysis of an Integrated Water Heating-Distillation Solar System for Domestic Use in Rural and Remote Areas

 		1998
14 Numerical Simulation of Two-Dimensional Flow and Heat Transfer Around a Hexagonal-Shaped Combustion Chamber

Bulletin of the Faculty of Engineering, Assiut University, Vol. 26, No. 1, January 1998, PP.61-75. 		1998
15 Comparative Study of Thermal Stratification in Horizontal and Vertical Storage Tanks 1997
16 Towards a Comprehensive Methodology to Solve the General Transport Phenomena Problems 1996
17 Experimental Determination of the Levels of Total Particulate Matters Concentrations in the Ambient Air Resulted from Sugar Factories Emission Sources

 		1995
18 Parametric Study of Performance Enhancement of Underground Thermally Stratified Storage Tank 1995
19 The Effect of Sugar Cane Industry on Ambient Air Quality : A Field Investigation of Gaseous Pollutants Concentration Levels

 		1995
20 Analysis and Comparison of the Performance of Overground and Underground Thermally Stratified Storage Tanks 1994
21 Study and Analysis of Thermal Behavior and Performance of Optimized Solar Collectors Fields for Industrial Process Heat Applications 1990
22 Thermal and Hydrodynamic Analysis of Collectors Arrangement and Piping Network of Medium Temperature Solar Heating Systems 1990
23 Predictions of Turbulent Boundary Layers Under Adverse Pressure Gradient Conditions Including Separation 1989
24 A Generalized Overlapping Model for Atomizers Spray Patterns 1989
25 Design of Closed Cooling Cycle for Engines in Assiut University Heat Laboratory
1988
26 Prediction of Secondary Flows in Non-Circular Ducts Using Finite Element Technique
 		1988
27 Stress Analysis of Contact Problems Using the Finite Element Method 1988
28 Experimental Investigation of Rotary Atomizers Spray Patterns : Effect of Operating Conditions and Atomizer Shape 1988
29 Solution of Contact Problem for a Rod Inserted in a Block Using the Finite Element Technique

 		1988
30 Simulation of Industrial Waste Heat Recovery Storage System

 		1988
31 The Use of Computer in Issuing the Final Results of Students

1988
32 Overlapping of Rotary Atomizers Spray Patterns


 		1988
33 Prediction of Liquid Atomizer Performance in Boom-wise Direction

 		1988
34 Measurements of Wall Shear Stress in Axial Flow in a Square Lattice Rectangular Rod Bundle

1986
35 Anisotropic Turbulent Flow in Rod Bundles

 		1984
36 A Simplified Finite Element Model for Fully Developed Axial Turbulent Flow in Rod Bundles

 		1983
37 Numerical Analysis of Solid Particle Distribution in Centrifugal Pump Volutes

 		1982
38 The Distortion of the Flow Field in a Circular Pipe Fitted with a Rod

1977

1- Walid Junaid Abdo Al-Nahari , Computational Fluid Dynamics Modeling of Environmental Flow Including Agricultural Fires Products ,2017-09-27
supervisor: Prof. Dr. Hamdy M. Shafey Prof. Dr. Mohammed M. Abdelghany Dr. Mohammed F. F. El-Dosoky

2- Walid Junaid Abdo Al-Nahari , Computational Fluid Dynamics Modeling of Environmental Flow Including Agricultural Fires Products ,2017-09-27
supervisor: Prof. Dr. Hamdy M. Shafey Mechanical Engineering Department Assiut University, Egypt Prof. Dr. Mohammed M. Abdelghany Mechanical Engineering Department Assiut University, Egypt Dr. Mohammed F. El-Dosoky Mechanical Engineering Department Assiut Uni

3- Ahmed Mohamed Bagabir , Numerical Investigation of Two-Dimensional Flow and Heat Transfer Around a Hexagonal-Shaped Combustion Chamber ,1997-09-30
supervisor: Dr. Mohamed M. Abdelghany Dr. David A. Yates - University of Manchester, Institute of Science and Technology (UMIST)

4- Mohamed Fekry Farah El-Dosoky , A Study on the Improvement of the Performance of a Centrifugal Pump with Inducer ,2000-06-27
supervisor: Prof. Dr. Ahmed K. S. Ayyad Dr. Mohamed M. Abdelghany Dr. Omar M. E. Abdel-Hafez

5- Mahmoud Abedel-Hafeiz Aly , The Application of Vibration Measurements in Maintenance of Industrial Machinery ,1992-02-16
supervisor: Prof. Dr. Omar El-Khattab Dr. Mohamed M. Abdelghany

6- Mahmoud Saber Youssef , Prediction of Incompressible Turbulent Boundary Layers Under Different Adverse Pressure Gradients ,1989-06-12
supervisor: Prof. Dr. Fayez M. Wasef Dr. Mohamed M. Abdelghany

7- Mahmoud Amin Ahmed , Analysis of Droplet Distribution of Rotary Disc Sprayers ,1987-12-07
supervisor: Prof. Dr. Ahmed S. Huzayyin Dr. Yahya A. Elhinny Dr. Mohamed M. Abdelghany

8- Mostafa Ahmed Mehran , A Comparative Study of the Performance of Underground and Over Ground Tanks in Seasonal Storage of Thermal Energy ,2004-12-26
supervisor: Ibrahim Mohammad Shafi Taha, Ibrahim Mohamed Ismail, Mohamed Mahmoud Abdel-Ghani
 

الجمعيات العلمية و النقابات :

Research Projects