Mohsen AbdelNaeim Hassan Mohamed

Faculty of Engineering

Assiut University

Department
Fax No
N/A
Email:
el_khozami@rocketmail.com
MIS Email
mohsen.mohamed@eng.au.edu.eg
Mobile
201024904983
Office
N/A - 20882411159
Google Scholar
google_scholar
Ph. D. In Mechanical Engineering (Design and Manufacture, Metal forming Technology) , Faculty of Engineering Kyoto Institute of Technology, Japan , 2002
M. Sc. In Mechanical Engineering (Design and Manufacture, Metal Forming) , Faculty of Engineering Assiut University , 1998
B. Sc. In Mechanical Engineering (Design and Production) , Faculty of Engineering Minia University , 1991

Professor Faculty of Engineering, ِِAssiut University , 2014

Associate Professor Faculty of Engineering, Assiut University , 2008

Lecturer Faculty of Engineering, Assiut University , 2002

Assistant Lecturer Faculty of Engineering, Assiut University , 1998

Demonstrator Faculty of Engineering, Assiut University , 1993
# Title Research Year
1 Ballistic impact simulation of proposed bullet proof vest made of TWIP steel, water and polymer sandwich composite using Fe-SPH coupled technique
 		2018
2 A surface response optimization model for EPQ system with imperfect production process under rework and shortage 2017
3 Implementation of Fuzzy and Adaptive Neuro-Fuzzy Inference Systems in Optimization of Production Inventory Problem 2017
4 Numerical simulation of metal removal in laser drilling using radial point interpolation method
 		2017
5 Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics
 		2017
6 Optimization of reliability based model for production inventory system 2017
7 Constitutive modelling of elastomer/graphene platelet nanocomposites
 		2017
8 A study on the different finite element approaches for laser cutting of aluminum alloy sheet

 		2017
9 Implementation of Fuzzy and Adaptive Neuro-Fuzzy
Inference Systems in Optimization of Production
Inventory Problem 		2017
10 A PC‐based simulation platform for a quadcopter system with self‐tuning fuzzy PID controllers

 		2016
11 Finite element analysis of fusion laser cutting on stainless steel-304 2016
12 Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel
 		2016
13 Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test
 		2016
14 A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining
 		2016
15 Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test 2016
16 Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel 2016
17 Severe plastic deformation of tubular AA 6061 via equal channel angular pressing
 		2016
18 Mechanical and Chemical characterization of a TiC/C system synthesized using a focus plasma arc 2015
19 Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing
 		2015
20 Investigation of embedded Si/C system exposed to a hybrid reaction of centrifugal-assisted thermite method
 		2015
21 Enhancing power transfer capability through flexible AC transmission system devices: A review 2015
22 Novel uses of SiO2nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data
 		2015
23 Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique
 		2015
24 Monte Carlo Simulation Model for Magnetron Sputtering Deposition 2015
25 Identification of Critical Load for Scratch Adhesion Strength of Nitride-Based Thin Films Using Wavelet Analysis and a Proposed Analytical Model 2015
26 Novel uses of SiO2 nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data
 		2015
27 Dynamic Power Flow Control in Transmission Lines using Fuzzy Logic Based Unified Power Flow Controller 2015
28 Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder 2015
29 Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder
 		2015
30 Dissimilar friction stir welding between polycarbonate and AA 7075 alloy International Journal of Materials Research 2015
31 Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base 2015
32 Power Quality Improvement in Transmission Network using Fuzzy Logic based Unified Power Flow Controller 2015
33 Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy 2015
34 A Contrast Adjustment Thresholding Method for Surface Defect Detection based on Mesoscopy 2015
35 Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder 2015
36 Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation 2015
37 A contrast adjustment thresholding method for surface defect detection based on mesoscopy
 		2015
38 3D FEM Simulation to Predict the Heat Affected
Zone during Laser Machining on Stainless
Steel 304
 		2015
39 Modeling the effects of myocardiac fiber architecture and material properties on the left ventricle mechanics during rapid filling phase 2015
40 Optimal Placement of Unified Power Flow Controllers to Improve Dynamic Voltage Stability Using Power System Variable Based Voltage Stability Indices 2015
41 Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
 		2015
42 The application of equal channel angular pressing to join dissimilar metals, aluminum alloy and steel, using an Ag-Cu-Sn interlayer 2015
43 A fuzzy logic based prediction model for kerf width in laser beam machining 2015
44 Identification of critical load for scratch adhesion strength of nitride-based thin films using wavelet analysis and a proposed analytical model
 		2015
45 Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique 2015
46 Deep drawing characteristics of square cups through conical dies 2014
47 In-situ TiC-Fe-Al2O3-TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis 2014
48 Influence of temper rolling on tensile property of low carbon steel sheets by application of Hill 48 anisotropic yield criterion 2014
49 D-Q model of Fuzzy based UPFC to control power flow in transmission network 2014
50 Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification 2014
51 Fuzzy Swinging-up with Sliding Mode Control for Third Order Cart-Inverted Pendulum System 2014
52 Investigate the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball Endmill 2014
53 Alternative Methods to Determine the Elastoplastic Properties of Sintered Hydroxyapatite from Nanoindentation Testing 2014
54 Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension 2014
55 An Empirical Modified Fatigue Damage Model for Impacted GFRP Laminates 2014
56 Study of Ti+C combustion synthesis reaction in a controlled declining temperature state 2014
57 Modified smoothed particle hydrodynamics (MSPH) for the analysis of centrifugally assisted TiC-Fe-Al2O3 combustion synthesis 2014
58 An Inverse Finite Element Method for Determining the Tissue Compressibility of Human Left Ventricle Wall during the Cardiac Cycle 2014
59 Decoupled Third-order Fuzzy Sliding Model Control For Cart- Inverted Pendulum System; 2013
60 End Formation of a Round Tube into a Square Section having Small Corner Radii 2013
61 Optimum culture conditions for 1,3-Propanediol production from Crude Glycerol using metaheuristic algorithms, 2013
62 A Developed Process for Increasing Deep Rrawability of Rectangular Metal Cups with Extreme Aspect Ratio: Finite Element Simulation 2013
63 Stability of geostationary flying satellite under combined sliding mode and PID control 2013
64 A Developed Friction Test for Sheet Metal Forming 2013
65 A developed friction test for sheet metal stretch forming processes 2013
66 The Effects of An Unexpected Ceramic Coating Phase at the Head of a Pipe on Joining and Postprocessing of a Ceramic-Lined Composite Pipe. 2013
67 Sintering properties of hydroxyapatite powders prepared using different methods, 2013
68 Nanocrystalline forsterite for biomedical applications: Synthesis, microstructure and mechanical properties, Original Research Article 2013
69 Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling 2013
70 AXIAL CRUSH BEHAVIOUR OF SQUARE COLUMN WITH EXTERNAL TAPERED PLUNGER 2013
71 Influence of Manganese on the Sintering Properties of Tetragonal Zirconia 2013
72 Novel Three-phase Asymmetrical Cascaded Multilevel Voltage Source Inverter 2013
73 Densification behavior of Y-TZP containing zirconium diboride composites 2013
74 Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite 2013
75 Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm 2013
76 A novel fabrication method for TiC Al2O3 Fe functional material under centrifugal acceleration 2013
77 Characterization of forsterite ceramics 2013
78 "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling" 2013
79 Axial Crush Behaviour of Square Column with Tapered External Plunger 2013
80 Properties of Hydroxyappitite synthesize by wet chemical 2013
81 Modeling and Simulation of The Action Potential In
Human Cardiac Tissues Using Finite Element Method 		2012
82 A finite Element Model for the Electrical Activity in
Human Cardiac Tissues 		2012
83 Sliding mode and PID controller in geostationary satellite attitude control 2012
84 High operating steam pressure and localized overheating of a primary superheater tube 2012
85 A developed Process for Deep Drawing of Metal Foils Square cups 2012
86 Sopyan, S.Meenaloshini, Mechanical and Electrical Properties of Y-TZP/ZrB2 Composite, Advanced Materials Research 2012
87 The Nonlinear Elastic and Viscoeleastic Passive Properties of Left ventricular Papillary Muscle of a Guiea Pig Heart, International 2012
88 Effect of Ultrasonication on Synthesis of Forsterite Ceramics. Advanced Materials Research 2012
89 A fuzzy model for evaluation, prediction and control of slurry erosion of ductile materials; 2012
90 Effect of Slot on the Impact Response of Square Column, Adv. Sci. Lett. 2012
91 Modelling and simulation of the action potential in human cardiac Tissues using Finite element method 2012
92 Evaluation of the material constants of nitrile butadeine rubbers (NBR) with different carbon black loading(CB)FEM-simulation and experimental; Polymer 2012
93 Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact 2012
94 Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Advanced Materials Research 2012
95 Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet, Materials and Desig 2012
96 High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction. 2011
97 Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart 2011
98 Impact response of Multi Slotted square column 2011
99 Friction aided deep drawing using blank holder divided into four segments 2010
100 Development of a new process for producing deep square cups through conical dies. International 2009
101 Calibrating the Nonlinear elastic and viscoelatic tissue properties of ventricular myocytes from guinea pig heart 2007
102 Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates 2006
103 A novel micro-device for measuring the electromechanical properties of a single myocyte 2006
104 Multi-functional cell mapping device 2006
105 Compound two dimensional thermo-elastic and thermodynamic analysis for C-axis Oriented Epitaxial Lead Titanaet thin films 2006
106 A novel process on friction aided deep drawing using tapered blank holder divided into four segments 2005
107 Study of the effective boundary conditions in finite element simulation of the heart mechanics 2004
108 A novel micro-device for measuring the electromechanical properties of a single myocyte 2004
109 A Novel Friction Aided Deep Drawing Process for Producing Deep Square Cups 2004
110 Wrinkling inclusion into thin flat sheets; A proposed method for enhancing strength 2004
111 Sliding contact analysis of Viscoelastic cylinders 2004
112 Friction aided deep drawing using newly developed blank-holder divided into eight segments. International 2003
113 A novel technique of Friction aided deep drawing using blank-holder divided into four segments 2003
114 Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 1: experimental observations on deep drawing of aluminum thin sheets and foils, International 2002
115 A Fuzzy model for prediction of forming pressure in the Maslennikov s deep drawing process, JSME/ASME Int. Conf. on materials and processing, Hawai 2002
116 A Fuzzy model for prediction of flow-stress in metal forming 2002
117 Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 2: analysis of the drawing mechanism and process parameters, International 2001
118 A Fuzzy model for prediction of flow-stress in metal forming, Proceedings of the Int. Conf. on materials processing 2001
119 A Novel technique on friction aided deep drawing using blank holder divided into four segments, Proceedings of the Ninth International Manufacturing Conference in China IMCC 2000
120 Finite element simulation of OSU friction test, Proc. The Fifth Int Conf. on Production Engineering and design, For Development PEDD5, Ein Shams 1998
1- ABU MOHAMMED SIFULLAH , STUDYING THE FUSION CUTTING MECHANISM IN CO2 LASER BLANKING OF STAINLESS STEEL-304 SQUARE SAMPLES ,2017-04-01
supervisor: الدكتور نكمان بن يوسف الأستاذ الدكتور محسن عبد النعيم حسن محمد

2- Ahmed Abdel-Aleeim , Optimisation of inventory production systems with imperfect products ,2016-12-13
supervisor: Prof. Dr Mohamed Gad Elsebaei Prof. Dr Mohsen Abdelnaeim Hassan Dr Mahoud El-Shreif

3- Maayad ABU Ramaila , A PC-Based Simulation Platform for a Quadcopter System with Self-Tuning Fuzzy PID Controllers ,2016-09-09
supervisor: Prof. Dr. Mohsen Abdelnaeim Hassan Mohamed Dr. Azizi ( Malaysia)

4- Moe Win , DEVELOPMENT OF A MESOSCOPIC IMAGING SYSTEM FOR SURFACE INSPECTION ,2016-01-15
supervisor: Dr BUshrao Binti Abdel Razak Prof. Mohsen Abdel Naeim Hassan

5- Fadi M. Albatsh, , Fuzzy Based Unified Power Flow Controller for Increasing Power Transfer Capability: Simulation and Hardware Implementation ,2015-12-09
supervisor: Professor Saad Mekhlif (Malaysia) Associate professor Hazli Mokhles (Malaysia) Professor Mohsen Abdelnaein Hassan

6- Nadri Sadjad , Damage Behaviour of Glass Fiber Reinforced Polymer Laminate and Bovine=Derived Hydroxyapatite Under Low Velocity Impact Loading ,2015-08-21
supervisor: Professor Dr Mohsen AbdelNaeim Hassan Mohamed Dr Bushroa Binti Abdel Razak

7- Daial Hussein Algabouri , Non-deterministic Methods for modelling and simulation of Physical vapour coating process. ,2015-06-18
supervisor: Prof. Dr. Mohsen Abdel naeim Hassan Mohamed

8- Davoud Jafrluo , A Developed deep drawing process for producing rectangular cups with extreme aspect ratio ,2013-06-26
supervisor: Pror. Dr. Mohsen Abdelnaeim Hassan Mohamed

9- Nik Masmiati Binti Nik , Influences of cutting parameters and lubrication modes on residual stresses and surface integrating quality of milled machined metals ,2015-06-12
supervisor: Prof. Dr.Mohd Hamdi Abd Shukor, Prof. Dr. Mohsen Abdelnaeim Hassan Associate prof. Ahmed Aly Diaa

10- Ahned Khalaf Mosa , On Fuzzy Logic and Fuzzy system : Modelling and applications ,2012-03-28
supervisor: Prof. Ahmed Mohamed Zahran Prof. Mohamed Azab Abdullah Dr. Mohsen Abdelnaeim Hassan

11- Hassan Tariq AL-Mashhadani , Modeling and Simulation of a Aquad Copter using PID Controllers ,2015-01-19
supervisor: Prof. Dr Mohsen Abdelnaeim Hassan Mohamed

12- Mofleh Alwazani , Modeling and Simulation of a Micro Tactile Sensor for Soft Tissue Stiffness Detection ,2015-01-15
supervisor: Prof. Dr Mohsen Abdelnaeim Hassan Mohamed

13- Raza Moshwan , Friction Stir Welding of Aluminum Alloy (AA5052): Experimental and Simulation ,2014-12-03
supervisor: Professor Dr Mohsen Abdelbaeim Hassan Mohamed (Egypt) Dr. Farazila Yusof ( Malaysia)

14- Hamza BelKamel , DESIGN OF A NEW THREE-PHASE CASCADED HALF-BRIDGE MULTILEVEL INVERTER ,2014-09-19
supervisor: Prof. Dr. Saad Mekhilef Assoc. Prof. Dr. Mohsen Abdel Naeim Hassan Mohamed

15- MOHAMMAD ALBAHY ABDUL HAMID ALFIKY , MODELLING AND SIMULATION OF MAGNETRON SPUTTERING PROCESS ,2014-06-05
supervisor: Associate Professor Dr. Mohsen Abdelnaeim Hassan Mohamed

16- Amir Radzi bin Ab Ghani , IMPACT RESPONSE OF ALUMINIUM SQUARE COLUMN UNDER NEWLY DEVELOPED TRIGGER MECHANISMS ,2014-05-29
supervisor: Asscoaite Prof. Dr Mohsen Abdelnaeim Hassan Mohamed Prof. Dr. Muhd Hamdi bin Abdul Shakur ( UM, Malaysia ) Prof. Dr Zahai Taha ( UMP, Malaysia )

17- ABDALLAH IBRAHIM MOHAMED HASABALLA , FINITE ELEMENT ANALYSIS OF HUMAN LEFT VENTRICLE MOTION AND MECHANICAL PROPERTIES ,2014-05-26
supervisor: Prof. Madya Dr. Mohsen Abdel Naeim Hassan Mohamed Dr. Noor Azizi Mardi (Malaysia)

18- Azhar Bin Abdul Satar , Finite Element Simulation and Experimental Verification of Temper Rolling Process of Low Carbon Steel Sheet ,2013-06-25
supervisor: Assoc. Prof. Mohsen Abdelnaeim Hassan Mohamed

19- Davoud Mashhadi Jafarlou , A Novel Process for Increasing Deep Drawability of Rectangular Metal Cups with Extreme Aspect Ratio: Design and Simulation ,2012-07-25
supervisor: Assoc. Prof. Mohsen AbdelNaeim Hassan Mohamed

20- Belal Ahmed Abdelaziz Elsayed , Development of a nonlinear Fuzzy controller for Mechatronics Application ,2012-10-25
supervisor: Prof. Saad Mekhlif ( Malaysia ) Assoc. Prof. Mohsen Abdelnaeim Hassan (Egypt)

21- Reza Mahmoudian , Development of Manufacturing techniques for Self Propagation High Temperature Syntheses ,2013-06-25
supervisor: Mohsen Bdelbaeim hassan, Mohd Hamdi

22- Labib mdhish Ali hzam , Deep drawing Characteristics of square cups through conical dies without blank holder ,2009-10-25
supervisor: Mohamed Gad El-Sibai, Ibrahim Mohamed hsp allah, Mohsen Abd el-Naeem Hassan

الجمعيات العلمية و النقابات :

Research Projects